T10E/T12E Plus


JLG Toucan 10E
Product Highlights
| Brand | JLG |
|---|---|
| Model | T10E |
| Working height | 10.10m |
| Platform height | 8.10m |
| Working Outreach | 3.38m |
| Lift capacity | 200kg |
| Drive speed – stowed | 5.5 km/h |
| Drive speed – raised | 0.6 km/h |
| Gradeability – stowed | 25% |
| Turning radius – inside | 0.55m |
| Turning radius – outside | 1.99m |
| Tires – (solid non-marking) | 406 x 125mm/solid (16×5”) |
| Power | 24 V DC (4 cells 6 V batteries 260 AH capacity) |
| Weight | 2,980 kg |
Productivity
- 0.90 m x 0.70 m (L x W) steel platform
- Slide bar rear entry
- Full proportional drive and slew joystick control with integral thumb steer switch
- Mini joysticks provide proportional mast and jib lift/lower functions
- 1.60 m articulating jib
- Load sensing system
- AC power cable to platform
- Large tool tray
- Two wheel direct electric drive
- Brushless AC drive motors
- Auto power save when idle
- Low charge function cut-out
- On-board diagnostics with integral display
- Automatic rear wheel brakes
- Sculptured polyester hoods
- Heavy duty steel roller mast with 345º rotation
- Chain slack detection system
- 2,5 degree tilt alarm and indicator light
- Passive pothole protection system
- 0.99 m wide frame
- Lifting /tie down rings
- Ground control selector switch with key lock
- Battery discharge indicator
- Hour meter
- Horn
- Drive orientation system
- Lanyard anchor points
- Zenon strobe light
Options
- AGM batteries
- Non-marking tire foam-filled
Notice:Token’s machine is perhaps not exactly the same as the above specification
JLG Toucan T12E Plus
Product Highlights
| Brand | JLG |
|---|---|
| Model | T12E Plus |
| Working height | 12.65m |
| Platform height | 10.65m |
| Working Outreach | 6.05m |
| Lift capacity | 200kg |
| Drive speed – stowed | 6.0 km/h |
| Drive speed – raised | 0.6 km/h |
| Gradeability – stowed | 25% |
| Turning radius – inside | 0.75m |
| Turning radius – outside | 2.60m |
| Tires – (solid non-marking) | 406 x 125mm/solid (16×5”) |
| Power | 48 V DC (8 cells 6 V batteries 260 AH capacity) |
| Weight | 4,900 kg |
Measurements
Productivity
- 0.70 m x 1.05 m (L x W) steel platform
- Slide bar rear entry
- Full proportional drive and slew joystick control with integral thumb steer switch
- Mini joysticks provide proportionalmast, telescope and jib lift/lower functions
- 4.14 m articulating jib
- Function enable with enlarged LCD function status display
- Load sensing system
- AC power cable to platform
- Large tool tray
- Two wheel direct electric drive
- Brushless AC drive motors
- Powered battery fill
- Auto power save when idle
- Low charge function cut-out
- On-board diagnostics with integral display
- Automatic rear wheel brakes
- Sculptured polyester hoods
- Powered platform rotation
- Heavy duty steel roller mast with 345º rotation
- Chain slack detection system
- 3 degree tilt alarm and indicator light
- 1.20 m wide frame
- Lifting /tie down rings
- Ground control selector switch with key lock
- Battery discharge indicator
- Hour meter
- Horn
- Drive orientation system
- Lanyard anchor points
- Zenon strobe light
- Manual descent system
- Passive pothole protection system
Options
- AGM batteries
- Non-marking tire foam-filled
Notice:Token’s machine is perhaps not exactly the same as the above specification

